The Shure BETA®91A is designed for use with kick drums, as well as other traditional low-frequency applications including piano. Featuring an updated microphone capsule, integrated preamplifier, and XLR connection, Beta 91A offers a strong low-frequency response and is specifically tailored for bass frequency applications. The Beta 91A combines superior attack and punch for studio-quality sound, even at extremely high sound pressure levels (SPL)

 

Features

  • Uniform half-cardioid polar pattern for maximum gain-before-feedback and rejection of off-axis sound
  • Precision-engineered low-profile design features integrated preamplifier and XLR connector to maximize setup efficiency while minimizing stage clutter
  • Frequency response tailored for kick drum/low frequency applications with a wide dynamic range for use in high SPL environments
  • Two-position contour switch to maximize attack and clarity depending on application: select the flat response setting for natural sound in most applications or the “low-mid scoop” setting for a strong low frequency “punch” with plenty of higher frequency attack
  • Requires no external mounting or accessories for ease of use and storage
  • Type: Electret Condenser
  • Frequency Response: 20Hz-20kHz
  • Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
  • Impedance: 146 Ohms
  • Sensitivity (at 1kHz, open circuit voltage): -48.5 dBV/Pa (3.8mV)
  • Maximum SPL ( kHz at 1% THD): 1,000 ohm load: 151dB; 2500 Ohm load: 155dB
  • Signal-to-Noise Ratio (referenced at 94 dB SPL at 1kHz): 64 dB
  • Dynamic Range (at 1kHz): 1,000 Ohm load: 121.5dB; 2500 Ohm load: 125.5dB
  • Common Mode Rejection (20Hz-20kHz): >55dB
  • Clipping Level (20Hz-20 kHz at 1% THD) 1,000 ohm load: 7.50dBV, 2,500 ohm load: 12.5dBV
  • Self Noise (typical, equivalent SPL, A-weighted): 29.5dB SPL-A
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
  • Weight: 16.6 oz.
  • Frequency Contour Switch: 7dB of attenuation centered at 400Hz
  • Connector: 3-pin XLR, balanced
  • Power Requirements: 11-52 Vdc phantom power, 5.6 mA